How To Create And Recall Custom Sets Of Chart Display Objects; Chart Database Information - Furuno FCR-21x9-BB Operator's Manual

2.37.3

How to create and recall custom sets of chart display objects

You can create one custom set of chart display objects and recall them when required.
For example, you can create a custom set of chart display objects to display when you
navigate a certain coastline.
How to create a custom set of chart display objects
1. Open the menu then select the [6 CHART DISPLAY] and [SEL DISPLAY OB-
JECT] menus.
2. Open the [STANDARD ITEMS], [OTHER ITEMS], [IMPORTANT TEXT] and
[OTHER TEXT] menus and turn objects and text on or off as appropriate.
3. Click [SEL DISPLAY OBJECT] on the menu.
4. Select [1 SAVE TO PERSONAL] to save the settings.
5. You are asked if it is OK to overwrite personal settings; click the [OK] button to
save the settings.
How to activate the custom set of chart display objects
Click the [Chart database] button (see the illustration below) on the Status bar then
select [PERSONAL].
2.37.4

Chart database information

You can select the quantity of objects and text to display on the chart radar screen,
with the [Chart database] button on the Status bar. There are four different pre-defined
settings available and one user-definable ([PERSONAL]). Indication of selected set-
ting appears on the label of the [Chart database] button. The [Chart ON/OFF] button
(on the InstantAccess bar) must be ON to show the [Chart database] button. The
[Chart database] button is grayed out if the [Chart ON/OFF] button is OFF.
[Chart database] button Selection
IMO Base Nothing checked in [STANDARD ITEMS], [OTHER
ITEMS] or [IMPORTANT TEXT].
IMO Primary Nothing else checked but "Buoys and Beacons" in
[STANDARD ITEMS]. This is the "Primary Chart Infor-
mation Set (PCIS)", based on IEC 62388
section11.1.4.1, IEC61174 and IMO Resolution
A.817(19).
IMO Standard All objects checked in [STANDARD ITEMS]; nothing
checked in [OTHER ITEMS] or [IMPORTANT TEXT].
IMO All Everything checked in [STANDARD ITEMS], [OTHER
ITEMS] and [IMPORTANT TEXT].
PERSONAL Use the settings recorded for [STANDARD ITEMS],
[OTHER ITEMS], [IMPORTANT TEXT] and [OTHER
TEXT].
2. RADAR, CHART RADAR OPERATION
Setting in [SEL DISP OBJECT] menu
2-55