4.3.2
Attachment to DIN rails
The FP-I4C unit enables a one-touch attachment to DIN rails.
1.
Fit the upper hook of the FP-I4C onto the DIN rail.
(1) Mounting panel
(2) DIN rail
2.
Without moving the upper hook, press on the lower hook to fit the FP-I4C into position.
(1) Mounting panel
(2) DIN rail
4.3.3
Removal from a DIN Rail
You can easily remove the FP-I4C from a DIN rail as described below.
1.
Insert a slotted screwdriver into the DIN rail attachment lever.
2.
Pull the attachment lever downwards.
FP-I4C
(1)
(2)
(1)
(2)
4.3 Mechanical installation
23