Connectors And Switches On The Rear And Left Side - Sony CCU-TX50 Operating Instructions Manual

Connectors and Switches on the Rear and Left Side

a CCU connector
c INTERCOM/PROGRAM connector
d EARPHONE jack
e AUDIO IN CH1/CH2 switches
f AUDIO IN +48V CH1/CH2 switches
g AUDIO IN CH1/CH2 connectors
a CCU (Camera control unit) connector (CA-
TX50: Kings triaxial connector, CA-TX50P:
Fischer triaxial connector)
Connect a CCU-TX50/50P camera control unit via a
triaxial cable. In addition to supporting signal
transmission between this unit and the connected
camera control unit, the triaxial cable enables this unit to
receive its power supply via the camera control unit.
Using a coaxial cable to connect the camera
control unit
The CCU connector must be refitted to enable
connection of a coaxial cable. Note that connecting a
coaxial cable makes it impossible for this unit to receive
power from the camera control unit. Use a AC-DN10
AC Adaptor for AC power sources.
Contact your Sony dealer for more information on refitting the
CCU connector.
b UHF portable tuner taps
h DC OUT connector
i DC IN connector
j PROMPTER connector
k RETURN connector
b UHF portable tuner taps
When using an optional WRR-861*/862 series UHF
Portable Tuner, attach (supplied with the WRR-861*/
862 series) the portable tuner mounting plate.
For details of attaching and using the WRR-861/862 series,
see the Operating Instructions for the WRR-861/862 series.
* WRR-861 series UHF Portable tuner is not available in some areas.
For details, contact your Sony dealer.
c INTERCOM/PROGRAM connector (XLR
5-pin, female)
Connect a headset for monitoring intercom audio or
program audio. Normally, a monaural (one-side)
headset should be connected.
An internal adjustment can be made to enable both sides
of the headset to receive audio, with intercom audio on
the left side and program audio on the right side.
Contact your Sony dealer for further information on this
internal adjustment.
Location and Function of Parts
11