Basic Configuration Of Menu Display - Sony CCU-TX50 Operating Instructions Manual

Basic Configuration of Menu Display

Status display
When you do not select any menu or the signal from
the camera, the LCD shows the following status
display:
On the status display, the set value
of each item is only displayed. The
setting is made with the Function
menu or with the corresponding
knob on the operation panel.
When you select a scene file,
the filename is displayed.
Initial display (Paint menu)
When you press and light the PAINT 1 (or PAINT 2,
PAINT 3) button of the menu operation block, the
initial display of the Paint menu is obtained.
To clear the adjusted values
The names of the items are
displayed. Press the name
of the item to be adjusted.
The color of the pressed
name area will change, and
the lower half of the panel
will become the adjustment
display (see the next page).
The set values of the shutter and master gain
are displayed. You may adjust these items
using the Function menu.
Status
Shutter M. Gain
60 12dB
Scene File : 2 DXC-D50
White Gamma
0 0 0
Black
0 0 0
Clear
White Black Flare
The ND filter number being selected
on the camera is displayed.
Filter
1
You may adjust these items using the
Detail
WHITE, MASTER GAMMA, BLACK/
0
FLARE, and DETAIL knobs, and IRIS
control (or IRIS lever).
Iris
The "Black" columns can be changed to
2
"Flare" using the OTHERS menu.
Current page number / total number of pages
1 / 5
Press either to flip the pages of the
menu.
Gamma
/Knee
69