Sony CCU-TX50 Operating Instructions Manual page 79

Viewfinder Normal Indications
qd Audio recording level indicators
These show the recording levels of audio channels 1
and 2 on the VTR.
Channel 1
Channel 2
PVV-3/3P –20 dB
∞
DSR-1/1P –
qf Tape remaining indication
This shows the tape remaining in the VTR as follows.
Indication
F-30
30-25
25-20
20-15
15-10
10-5
5-0
5-0 (flashing)
qg Lens f-stop indication
This shows the f-stop of the lens.
Note
Depending on the lens being used, this indication may
differ slightly from the actual f-stop on the lens.
qh Clock indication
The clock indication is shown in one of the following
ways (according to the CLOCK IND setting on page
M3 of the MAINTENANCE menu).
CAM: Always displayed.
BARS: Displayed whenever color bars are
displayed.
OFF: Not displayed.
If the clock indication is displayed during recording, it
is superimposed on the image.
Note
If the charge of the lithium battery inside the camera
head is exhausted, the clock indication cannot be
displayed. Replace the lithium battery and set the clock
again.
54
Chapter 4 Viewfinder Screen Indications and Menus
+3 dB
0 dB
0 dB
–2 dB
Tape remaining
At least 30 minutes
25 - 30 minutes
20 - 25 minutes
15 - 20 minutes
10 - 15 minutes
5 - 10 minutes
2 - 5 minutes
0 - 2 minutes