Sony CCU-TX50 Operating Instructions Manual page 164

Menu Configuration and Basic Menu Operations
Menu 2ndary menu Submenu
RCP Config VR Setting
(cont.)
(cont.)
Information
Cable Comp
SW Setting
CAM No.
Date/Time
Set
Comm Link
Security
The item "Status" is displayed only in Engineer Mode.
78
Control item
M. Black VR
Cable Length
• SW Assign/Sel
CAM ID->No.
• No.
Date • Year
• Month
• Day
Set
Cancel
Time • Hour
• Minute
• Second
Set
Cancel
Gain
Shutter
R/B White
R/B Black
R/G/B Flare
Engineer Mode
Status Advance Mode
Screen Md Enable
Pan/Tilt Enable
Power On Active
Function
(Only available for RCP-D50) To select the response rate of the
MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,
and 1/4, where 1/1 is the quickest response position)
To display the software version of the unit
To set the length of the remote cable (5 m/25 m/50 m)
To allocate a function to the ASSIGN button
No Assign: No assignment
Black/Flare: Switching the function of the BLACK/FLARE knobs
Black Auto: ON/OFF of the auto black
ATW: ON/OFF of the auto tracing white balance
TLCS: ON/OFF of the total level control function
DynaLatitude: ON/OFF of the DynaLatitude function
To switch the display of the camera number/tally indication of the
unit between camera ID and camera number
To select the camera number to be displayed on the RCP
Date adjustment of the clock built into the unit
Time adjustment of the clock built into the unit
To turn ON/OFF command link operation (activation of several
cameras at the same time) of the gain
To turn ON/OFF command link operation of shutter settings
To turn ON/OFF command link operation of the white R/B
adjustment
To turn ON/OFF command link operation of the black R/B
adjustment
To turn ON/OFF command link operation of the flare R/G/B
adjustment
To set whether to display "Status", "Menu Set", and "Code No." or
not (With Engineer Mode ON, all operative menu items are
displayed regardless of the Advance Mode setting.)
To switch between the Normal Setting mode and Advanced Setting
mode of the menu
To set whether switching between 4:3 and 16:9 is enabled or not
To set whether panning/tilting adjustment is enabled or not
To specify the Panel Active and Iris/Master Black Active statuses
when the unit is started up
Full Active: To set the unit to the Panel Active status when started up
IRIS/M.Black: To set the unit to the Iris/Master Black Active
status when started up
Lock: To set the unit to the Panel Lock status when started up
Keep state: To set the unit to the previous state when started up
(Not operative)
(Not operative)