Adjusting The Buzzer Sound - Sony CCU-TX50 Operating Instructions Manual

Initial Settings
4
To set the date:
[Date]
1) Press and light
Date Time Setting
2001/11/17
(Sat)
22 : 12 : 31
Date Time
Year Month
2001 8
2) Set the Year, Month and Day with the left three
control knobs.
[Set]
3) Press
.
The set date becomes valid.
To restore the previous setting, press
[Set]
instead of .
5
To set the time:
[Time]
1) Press and light
Date Time Setting
2001/11/17
(Sat)
22 : 12 : 31
Date Time
Hour Minute
17 32
2) Set the Hour, Minute and Second with the left
three control knobs.
[Set]
3) Press
in synchronization with a time
signal.
The set time becomes valid.
To resume the previous setting, press
[Set]
instead of .
When the clock setting is completed
[Exit]
Press to leave the menu.
92
.
Exit
Set Cancel
Day
8
[Cancel]
.
Exit
Set Cancel
Second
25
[Cancel]

Adjusting the Buzzer Sound

A buzzer sounds on the RCP-D50/D51 when it
receives call signal or a panel control is operated.
When required, you may turn on/off the buzzer or
adjust the sound volume.
To adjust the buzzer, proceed as follows:
1
[RCP Adjusting]
Press
The RCP adjustment menu appears.
Clear
Buzzer LED
Volume Bright
2
[Buzzer Volume]
Press and light
The lower half of the display becomes the Buzzer
Volume adjustment display.
Clear
Buzzer LED
Volume Bright
Buzzer
Volume
Call Touch
Buzzer Click
Call Touch
50 50
3
Adjust the levels with the corresponding control
knobs (50 is the standard value with all items).
Call: Sound volume of the buzzer when a call
signal is received
Touch: Sound volume of the buzzer when a
button displayed on the menu display is operated
Switch: Sound volume of the buzzer when a
button on the panel is operated
The master volume can be adjusted with the
rightmost control knob (Master).
on the RCP Config menu.
Exit
.
Exit
SW All
Click Off
Switch Master
50 50