Sony CCU-TX50 Operating Instructions Manual page 158

Menu Configuration and Basic Menu Operations
Monitor output set display (Expansion menu)
[Monitor Select]
When you press
display of the Paint menu, the upper half of the panel
becomes the monitor output setting display.
Press again to return to
the previous display.
Scene File operation menu display
When you press and light the SCENE button of the
menu operation block, the Scene File operation menu
display is obtained.
Scene file recall buttons:
Buttons 1 to 20 can be displayed
by pressing v or V, or turning the
leftmost (Page) control knob.
For details on the scene file operations, see page 99.
72
on an adjustment
Monitor Select
R G B
Monitor
Select
Scene Files
1 2
Scene 1 : STUDIO1
Scene 2 : DXC-D30
File list
Scene 3 : TEST 002
Scene 4 :
Scene 5 :
Page
RGB SEQ ENC
Store
3 4 5
Scene : 2*
DXC_D
Char Cur
When the CCU-TX7 is connected, you
can select the WF/PIX output signals.
R/G/B: To independently select the R,
G, or B signal.
RGB: To select the R, G, and B signals
in combination.
SEQ: Only the WF output is enabled,
and you can monitor the waveforms of
the R, G, and B signals in sequence.
ENC (encode): The encoded signal is
output.
Scene file store button
Filename box:
Enter a filename using the
second (Char) from the right and
the rightmost (Cur) control knob.