Sony CCU-TX50 Operating Instructions Manual page 169

Page Menu
Paint 4 CLS/EVS
(cont.)
Function menu (with the DXC-D30/D35 series)
Menu Submenu Control item
Operation Jump menu 1
Jump menu 2
Jump menu 3
Jump menu 4
Jump menu 5
Jump menu 6
Jump menu 7
Shutter
• Shutter
CLS
• CLS
TLCS
• Master Gain
SW Page1 Skin Detail
Detail Gate
ATW
TLCS
Auto Knee
Skin Matrix
Flare Off
Page 2 Knee Aperture
Aperture
DL
White Clip Off
Detail Off
Gamma Off
Matrix Off
The submenu "Menu Set" can be selected from Security of RCP Config on the OTHERS menu.
Submenu Control item
TLCS
Shutter
CLS
EVS
• Shutter
• CLS
Function
To jump to the adjustment screen designated for Menu 1 in Menu Set (Default: White of Paint 1)
To jump to the adjustment screen designated for Menu 2 in Menu Set (Default:Black of Paint 1)
To jump to the adjustment screen designated for Menu 3 in Menu Set (Default: Flare of Paint 1)
To jump to the adjustment screen designated for Menu 4 in Menu Set (Default: Gamma/Knee of
Paint 1)
To jump to the adjustment screen designated for Menu 5 in Menu Set (Default: Detail of Paint 2)
To jump to the adjustment screen designated for Menu 6 in Menu Set (Default: Skin Detail of
Paint 2)
To jump to the adjustment screen designated for Menu 7 in Menu Set (Default: Matrix of Paint
3)
To turn the shutter function ON/OFF
To select the shutter speed
To turn the CLS (clear scan) function ON/OFF
To select the CLS frequency
To turn the TLCS (total level control) function ON/OFF
To select the master gain value among –3/0/3/6/9/12/18/18+DPR/24/24+DPR/HYPER Gain
To turn the skin detail function ON/OFF
To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail
correction or the skin matrix adjustment)
To turn the ATW (auto tracing white balance) function (which automatically adjusts the white
balance when lighting conditions change) ON/OFF
To turn the TLCS (total level control) function ON/OFF
To turn the Auto Knee function ON/OFF
To turn the skin matrix function ON/OFF
To turn the flare correction function ON/OFF (OFF while the button is lit)
To turn ON/OFF the detail correction to the level higher than the knee point
To turn the aperture correction ON/OFF
To turn ON/OFF the DynaLatitude function (for automatically setting the contrast between the
bright and dark areas by detecting the levels of the subject in these areas)
To turn the white clip function ON/OFF (OFF while the button is lit)
To turn the detail adjustment function ON/OFF (OFF while the button is lit)
To turn the gamma adjustment function ON/OFF (OFF while the button is lit)
To turn the linear matrix adjustment function ON/OFF (OFF while the button is lit)
Function
To turn the TLCS (total level control) function ON/OFF
To turn the shutter function ON/OFF
To turn the CLS (clear scan) function (which reduces noise on the
horizontal scan lines when the monitor screen connected to a PC is
shot) ON/OFF
To turn the EVS mode (which reduces flicker by increasing the
vertical resolutions) ON/OFF
To select the shutter speed
To adjust the CLS frequency
83