Smart Technologies 2000i-DVX Installation Manual page 8

• Avoid setting up and using the 2000i in an area with excessive levels of dust, humidity or
smoke.
• Lock the casters after you set up the cabinet so it remains stationary while in use.
• Avoid exposing the 2000i to extreme heat or cold. The operating temperature range is from
41°F to 84°F (5°C to 29°C) with up to 80% humidity (non-condensing). The shipping and
storage range is from 14°F to 95°F (-10°C to 35°C) with up to 80% humidity (non-condensing).
• If possible, unplug the unit before thunderstorms. However, do not touch the unit or the unit's
power plug during a thunderstorm as there is a risk of electrical shock.
• Unplug the unit if you won't use it for an extended period.
• Use safe practices when you're plugging in the power cable. For example, make sure your
hands are dry and don't insert the plug into a dusty outlet. Unplug the cabinet before you
install or service any components.
• This product has a three-wire grounding-type plug, which will only fit into an AC grounding-
type power outlet. Make sure an AC socket outlet is near the 2000i and remains easily
accessible during use. If you are unable to insert the plug into the outlet, have your electrician
replace the obsolete outlet. Do not circumvent the safety features of the grounding-type plug.
Do not modify the power cord.
• Handle the power cord carefully and avoid excessive bending. Route the power cord so it's
unlikely to be walked on or pinched by items placed upon or against it. If you must run a cable
over the floor, lay it in a flat, straight line and secure it to the floor with tape or a cable
management strip of contrasting color.
• If you require replacement parts, ensure the service technician uses replacement parts that
are specified by SMART Technologies Inc., or parts with the same characteristics as the
original.
Important Information v