Smart Technologies 2000i-DVX Installation Manual page 29

8. Turn on the DVD player, insert a DVD and press the Play button.
To link VCR and DVD player audio connections
NOTE: Make sure there is no tape in the VCR before you proceed.
1. Connect standard red and white RCA stereo audio cables (not provided) from the RCA Audio
(or Audio OUT) outputs on the DVD player to the RCA Audio (or Audio IN) inputs on the
VCR. Keep your right and left channel connections correct for stereo sound.
DVD Player
2. Connect standard red and white RCA stereo audio cables (not provided) from the RCA Audio
(or Audio OUT) outputs on the VCR to the two Auxiliary Audio IN jacks on the rear of the
2000i. Keep your right and left channel connections correct for stereo sound.
When you switch video sources, the audio source for the cabinet speakers will also switch.
18
RCA Outputs
C o m p u A u d i o t e r 2 A u d A u x i o I n i l i a r y O u t A u d i o
Setting Up Your 2000i
RCA Outputs
RCA Inputs
VCR
Computer 2 Aux iliary
Audio Audio In
Connect red and white RCA
audio cables here
To Auxiliary Audio IN
jacks on rear of
2000i
Audio
Out