Table of Contents
Advertisement
2. Hook the shelf to the keyholes, and then push the shelf firmly down.
3. Push the captive thumbscrew at the bottom of the shelf into the thumbscrew hole and tighten.
Connecting a Guest Laptop
You can connect and control a laptop presentation by touching the interactive screen only if you:
•
purchase and install the X-Port 20 switch option for the 2000i
OR
•
install and run LinQ™ software
The X-Port 20 unit is an RS-232 serial switch for establishing a serial connection with the laptop,
enabling the laptop user to both write over the displayed laptop image with a pen tray pen and
control the laptop by touching the screen. In addition, it allows you to switch between the laptop,
the resident computer and a VCR/DVD player using the control panel at the front of the 2000i. If a
guest laptop requires a USB connection to the 2000i, purchase the optional USB-ADP cable from
SMART Technologies to convert USB to serial. Complete instructions for installing the X-Port 20
switch and connecting a guest laptop are in the X-Port 20 Switch Installation Guide that comes
with the X-Port 20 option kit.
LinQ software enables you to link your 2000i to a laptop on the same network. For more
information on LinQ software, see www.smarttech.com/support/product/sb/guides.asp.
Connecting a VCR and/or a DVD Player
You can connect both a VCR and DVD player to the projector, provided you use a composite video
connection for the VCR and an S-video connection for the DVD player. With each press of the
VCR/DVD Player button, the projector alternates between the two players.
Although there is only a single external audio connection, you can "daisy chain" the audio
connections: Connect the DVD player's RCA audio cables to the VCR, and then the VCR's RCA
audio cables to the external audio jacks at the back of the 2000i. This linked audio connection
makes the audio source switch automatically when you switch the video sources.
14
Setting Up Your 2000i
Keyholes
Captive
Thumbscrew
Advertisement
Table of Contents
