37
• Check the condition of anchor lines, anchor and rode.
• Install the hull's drain plug and clean out any debris from bilge and cockpit.
• Remove antifreeze, hook-up open water lines and flush the water system.
• Close all seacocks for launching, then open and check for leaks.
Important Data For Identifying Your Boat
• Owners Name _____________________Address _____________________________________
• Hull Identification Number ______________ Vessel's Name ____________________________
• Hull colors____________________________________________________________________
• State Registration Number _______________________________________________________
• Home Port____________________________________________________________________
• Dealers Name & Phone Number __________________________________________________
• Servicing Dealer's Name & Phone Number__________________________________________
• Warranty Registration Date_______________________________________________________
• Radio Call Letters______________________________________________________________
• Radio Model Number & Serial Number_____________________________________________
• Ignition Key Numbers ______________Port _____________Starboard ______________Center
• Key Numbers _______Cabin _______Glove Box ______Miscellaneous ___________________
• Batteries _________ Number ______________________Model & Size ___________________
• Engine Make, Model & Horsepower: ______________________________________________
• Engine S/N: __________________Port _________________Starboard
• Prop: Diameter: _______" Pitch: _______" Number of Blades _______ Material________
FREEZE BAN INFORMATION SHEET
FREEZE BAN INHIBITS FOULING AND CORROSION
FREEZE BAN PREVENTS ALGAE GROWTH
FREEZE BAN HELPS TO LUBRICATE PUMPS AND VALVES
THROUGHOUT THE ENTIRE SYSTEM