Transfer/Separation Section; Detaching And Refitting The Transfer Roller Assembly - Kyocera ECOSYS FS-4300DN Service Manual

1-5-6 Transfer/separation section

(1) Detaching and refitting the transfer roller assembly

Procedure
1. Release four hooks by sliding to left the
paper chute guide.
2. Remove the paper chute guide upward.
3. Remove the axes of transfer roller from
each bush.
4. Remove the transfer roller assembly
upward.
5. Check or replace the transfer roller
assembly and refit all the removed
parts.
Paper chute guide
Transfer roller
assembly
Axis
Bushing
Transfer
roller
1-5-16
2LV/2L1/2L2/2MS/2MT
Hooks
Figure 1-5-25
Transfer roller
Axis
Bushing
Figure 1-5-26