Kyocera ECOSYS FS-4300DN Service Manual page 52

Service items
Altitude adj. Setting altitude adjustment
Description
Sets the altitude adjustment mode.
Purpose
Used when print quality deteriorates in an installation at the altitude of 1,500 meters or
higher.
Method
1. Enter the Service Setting menu.
2. Select [Altitude Adj.] using the cursor up/down keys.
3. Press the OK key.
4. Select [Normal], [High 1] or [High 2] using the cursor up/down keys.
5. Press the OK key. The setting is set.
MC Setting main charger output
Description
Sets the main charger output.
Execution is possible only when the altitude adjustment mode is set to [Normal].
Purpose
Execute when the image density declines, dirt of a background or an offset has
occurred.
Method
1. Enter the Service Setting menu.
2. Select [MC] using the cursor up/down keys.
3. Press the OK key.
4. Select [1] to [5] using the cursor up/down keys.
5. Press the OK key. The setting is set.
Description
1-3-14
2LV/2L1/2L2/2MS/2MT