Kyocera ECOSYS FS-4300DN Service Manual page 63

Code
0000 Initial jam
0100 Secondary paper feed
request time out
0101 Waiting for process package
to be ready
0104 Waiting for conveying pack-
age to be ready
0106 Paper feeding request for
duplex printing time out
0107 Waiting for fuser package to
be ready
0120 Receiving a duplex paper
feeding request while paper
is empty
0121 Exceeding number of duplex
pages circulated
0501 No paper feed of jam
0502
0503
0504
0505
0508
0509
*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).
Contents
The power is turned on when a sensor in the con-
veying system is on.
Secondary paper feed request given by the con-
troller is unreachable.
Process package won't be ready.
Conveying package won't be ready.
Paper feeding request for duplex printing given by
the controller is unreachable.
Fuser package won't be ready.
Paper feed request was received from the duplex
section despite the absence of paper in the duplex
section.
The controller issued the duplex section a request
for more pages than the duplex print cycle con-
tains.
The registration sensor 2 (RS2) does not turn on
during paper feed from cassette 1.
PF feed sensor 1 (PFPFS1) does not turn on dur-
ing paper feed from cassette 2.
PF feed sensor 2 (PFPFS2) does not turn on dur-
ing paper feed from cassette 3.
PF feed sensor 3 (PFPFS3) does not turn on dur-
ing paper feed from cassette 4.
PF feed sensor 4 (PFPFS4) does not turn on dur-
ing paper feed from cassette 5.
The registration sensor 2 (RS2) does not turn on
during paper feed from duplex section.
The registration sensor 2 (RS2) does not turn on
during paper feed from MP tray.
Conditions
1-4-3
2LV/2L1/2L2/2MS/2MT
Jam
location*
-
-
-
-
-
-
-
-
A
E
F
G
H
B
C