Paper Feed Section; Detaching And Refitting The Paper Feed Roller; Detaching And Refitting The Retard Roller - Kyocera ECOSYS FS-4300DN Service Manual

1-5-3 Paper feed section

(1) Detaching and refitting the paper feed roller

Procedure
1. Pull out the cassette.
2. Release the lock by pulling the lever.
3. Remove the paper feed roller assembly
by pulling and raising and then sliding
forward.
4. Check or replace the paper feed roller
and refit all the removed parts.

(2) Detaching and refitting the retard roller

Procedure
1. Release two hooks in backside of cas-
sette and then remove the retard roller
assembly.
Paper feed roller assembly
Holder
Lever
Figure 1-5-12
Cassette
Figure 1-5-13
1-5-8
2LV/2L1/2L2/2MS/2MT
Retard roller assembly
Backside in cassette
Hook