Kyocera ECOSYS FS-4300DN Service Manual page 34

Connecting the cable
1. Remove the inlet cover.
2. Open the rear cover.
3. Connect the USB interface cable to the
printer and PC.
4. Connect the network interface cable to
the printerand network.
5. Connect the power cord to the printer
and the wall outlet.
6. Refit the inlet cover.
7. Close the rear cover.
Figure 1-2-18
Figure 1-2-19
Power cord
Figure 1-2-20
1-2-10
2LV/2L1/2L2/2MS/2MT
USB interface cable
Inlet cover
Network
interface cable
Wall outlet