Chapter 2.Installing The Adapter; Installing Device Drivers; Managing The Adapter - IBM Flex System FC3052 User Manual

Flex system fc3052 2-port 8gb fc adapter

Table of Contents

Chapter 2. Installing the adapter

This chapter provides information and instructions for installing and configuring the

adapter. See the documentation that came with the IBM compute node to install the

adapter in the compute node; then, return to this User's Guide for the information and

instructions needed to complete the installation.

For device driver installation instructions, refer to the following operating

system-specific documentation:

Windows drivers

Windows Server 2008

Windows Server 2008 R2

Linux drivers

Citrix XenServer 6.0

Citrix XenServer 5.6

SLES 11

SLES 10

RHEL 6

RHEL 5

VMware drivers

ESX 5.0

ESX 4.1

Adapter management information is provided in the following application and utilities

documentation:

OneCommand™ Manager Application User Manual



(www.emulex.com/downloads/ibm/lightpulse-fc-hba-drivers.html)

Elxflash Offline/Online Utilities User Manual



(www.emulex.com/downloads/ibm/lightpulse-fc-hba-drivers.html)

Boot from SAN information is provided in the Boot Code User Manual for Emulex

Adapters (www.emulex.com/files/downloads/hardware/bootcode.pdf).

IBM Flex System FC3052 2-port 8Gb FC Adapter User's Guide

www.emulex.com/downloads/ibm/lightpulse-fc-hba-drivers.html

Table of Contents