Product Overview; Symbols Used; Product Label - Danfoss DLX 2.0 Installation Manual

1. Product Overview

This Installation Guide contains all the necessary install information to connect and start up
the DLX inverter. The inverter must be used in compliance with the DLX User Guide, which is
to be found at www.Danfoss.com.

1.1. Symbols Used

The warning symbols used in this Installation Guide highlight important information on
how to avoid shock hazards to equipment and persons. Pay particular attention when
the symbols appear!
Table 1.1: Warning symbols appearing in this guide
Symbol Description
DANGER:
death to workers and/or the general public if not avoided.
WARNING
result in the death or serious injury of workers and/or the general public if not
avoided.
CAUTION
lesser threat of injury that could result in minor or moderate injuries to workers
and/or the general public.
NOTICE
to damage of property and equipment. May be used to indicate important
operational characteristics. There is no Safety Alert or attention symbol present in
this situation.

1.2. Product Label

The product label contains important identification parameters and characteristics for the
inverter, and must be clearly visible after installation.
Figure 1.2.1: Product Label
4
Situations where an immediate hazard could cause serious injury or
:
Situations where a potentially hazardous condition exists that could
:
Situations where a non-immediate or potential hazard presents a
: Situations where a non-immediate or potential hazard presents a risk
Installation Guide DLX series L00410622-01