Exit Selecting - Aaeon ECM-5716 Series User Manual

ECM-5716 Series
When a password has been enabled, you will be prompted to enter it every time you try to
enter Setup. This prevents an unauthorized person from changing any part of your system
configuration. Additionally, when a password is enabled, you can also require the BIOS to
request a password every time your system is rebooted. This would prevent unauthorized
use of your computer. You determine when the password is required within the BIOS
Features Setup Menu and its Security option (see Section 3). If the Security option is set
to "System", the password will be required both at boot and at entry to Setup. If set to
"Setup", prompting only occurs when trying to enter Setup.
4.5.13

Exit Selecting

4.5.13.1 Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Pressing "Y" stores the selections made in the menus in CMOS – a special section of
memory that stays on after you turn your system off. The next time you boot your
computer, the BIOS configures your system according to the Setup selections stored in
CMOS. After saving the values the system is restarted again.
ECM-5716 Series User' s Manual 65