2.2
System Specifications
General Functions
•
CPU: Supports Intel Pentium-M series processors
•
BIOS: Award 512 KB FWH BIOS
•
Chipset: Intel 855GME + Intel 82801DB (ICH4)
•
I/O Chipset: Winbond W83627HF-AW
•
Memory: Onboard one DDR SDRAM socket supports up to 1 Gbytes DDR
333/266/200 SDRAM
•
Enhanced IDE: Supports up to four IDE devices. Supports Ultra DMA/100 mode
with data transfer rate up to 100MB/sec. (Primary: 20 x 2 box header; Secondary:
22 x 2, pitch 2.0mm box header onboard for DiskOnModule)
•
FDD Interface: Supports up to two floppy disk drives, 5.25" (360KB and 1.2MB)
and /or 3.5" (720KB, 1.44MB, and 2.88MB). Supports Mode-3 FDD
•
Parallel Port: An Internal header for bi-directional parallel port x 1. Supports SPP,
ECP, and EPP modes
•
Serial Port: Supports Two RS-232 serial ports. Ports can be configured as COM1,
COM2, COM3, COM4, or disabled individually. (16C550 equivalent) (COM1 with D-
Sub 9, COM2 with 5 x 2, pitch 2.54 box header) COM2 can be set as RS-
232/422/485.
•
IR Interface: Supports one IrDA Tx/Rx header
•
KB/Mouse Connector: External mini-DIN PS2 Keyboard/Mouse connector x 1,
Internal KB/Mouse connector 4X2 header pitch 2.54mm
•
USB 2.0 Connectors: Two external USB 2.0 connectors. One 5 x 2, pitch 2.54mm
header supports additional dual USB 2.0
•
Watchdog Timer: Can generate a system reset, IRQ10/11 or NMI. Software
selectable time out interval (1 sec. ~ 255 min., 1 sec. or 1 min. /step)
•
Power Management: Supports ATX power supply. Supports PC97, LAN wake up
and modem ring-in functions. I/O peripheral devices support power saving and
doze/standby/suspend modes. ACPI 2.0 & APM 1.2 compliant.
ECM-5716 Series User' s Manual 3
ECM-5716 Series