7.
Depending on the configuration, a request for the windows disks or CD-ROM may be
necessary. Insert the disk / CD-ROM and click the ' OK' button. An entry of the
directory for the files may then be required. After typing the path name, click the ' OK'
button.
8.
To complete the installation, reboot the computer by clicking the ' Yes' button in the
window shown below.
9.
After the system restarts, the network adapter should be installed. Protocols, clients
etc. may now be installed for the network in use.
Further configuration of the adapter may be made in the ' Advanced' section of the driver
properties. These options may be accessed through the ' Network' icon in the control
panel (Select the network adapter, click the ' Properties' button and select the ' Advanced'
tab).
ECM-5716 Series User' s Manual 73
ECM-5716 Series