Table of Contents
Advertisement
User' s Manual
4.5.2.2
IDE Adapters
The IDE adapters control the hard disk drive. Use a separate sub menu to configure each
hard disk drive.
Figure 2 shows the IDE primary master sub menu.
Use the legend keys to navigate through this menu and exit to the main menu. Use Table
3 to configure the hard disk.
Item
IDE HDD Auto-detection
IDE Primary Master
Capacity
Access Mode
The following options are selectable only if the ' IDE Primary Master' item is set to ' Manual'
Cylinder
Head
Precomp
Landing zone
Sector
48 ECM-5716 Series User' s Manual
Options
Press Enter
None
Auto
Manual
Auto Display your disk drive
size
Normal
LBA
Large
Auto
Min = 0
Max = 65535
Min = 0
Max = 255
Min = 0
Max = 65535
Min = 0
Max = 65535
Min = 0
Max = 255
Table 3 : Hard disk selections
Description
Press Enter to auto-detect the HDD
on this channel. If detection is
successful, it fills the remaining fields
on this menu.
Selecting ' manual' lets you set the
remaining fields on this screen.
Selects the type of fixed disk. "User
Type" will let you select the number
of cylinders, heads, etc. Note:
PRECOMP=65535 means NONE !
Disk drive capacity (Approximated).
Note that this size is usually slightly
greater than the size of a formatted
disk given by a disk checking
program.
Choose the access mode for this
hard disk
Set the number of cylinders for this
hard disk.
Set the number of read/write heads
**** Warning: Setting a value of
65535 means no hard disk
****
Number of sectors per track
Advertisement
Table of Contents
