1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Motherboard
  5. EMB-H61B
  6. Manual

Aaeon EMB-H61B Manual

Industrial motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
I n d u s t r i a l M o t h e r b o a r d
E M B - H 6 1 B
EMB-H61B
st
Manual 1
Ed.
December 2012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EMB-H61B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon EMB-H61B

Summary of Contents for Aaeon EMB-H61B

  • Page 1 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B EMB-H61B Manual 1 December 2012...

  • Page 2: Copyright Notice

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Copyright Notice This document is copyrighted, 2012. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.
  • Page 3 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Acknowledgments All other products’ name or trademarks are properties of their respective owners.

  • Page 4: Packing List

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Packing List Before you begin installing your card, please make sure that the following materials have been shipped: ...

  • Page 5: Table Of Contents

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Contents Chapter 1 General Information 1.1 Features ..............1-2 1.2 Specifications ............1-3 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.16 Digital I/O Connector (DIO) ........2-12 2.17 Front Panel Connector (F_PANEL) ......2-13 2.18 Inverter Connector (INV) .........

  • Page 7: Chapter 1 General Information

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 8: Features

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 1.1 Features ® Intel Socket 1155 for 3 Generation Core™ i7/ i5/ i3/ Pentium®...

  • Page 9: Specifications

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 1.2 Specifications System ® Processor Intel generation Core™ i7/i5/i3 Processor, up to 65W System Memory 204-pin dual-channel DDR3 1333/1066 SODIMM x 2, Max.
  • Page 10 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Gross Weight 1.1 lb (0.5 Kg) Operating Temperature 32° F ~ 131° F (0° C ~ 55° C) Storage Temperature -40°...

  • Page 11: Chapter 2 Quick Installation Guide

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Chapter Quick Installation Guide 2 - 1 Chapter 2 Quick Installation Guide...

  • Page 12: Safety Precautions

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 13: Location Of Connectors And Jumpers

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.2 Location of Connectors and Jumpers Component Side 2 - 3 Chapter 2 Quick Installation Guide...

  • Page 14: Solder Side

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Solder Side 2 - 4 Chapter 2 Quick Installation Guide...

  • Page 15: Mechanical Drawing

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.3 Mechanical Drawing Component Side 2 - 5 Chapter 2 Quick Installation Guide...
  • Page 16 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Solder Side 2 - 6 Chapter 2 Quick Installation Guide...

  • Page 17: List Of Jumpers

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
  • Page 18 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B COM5 COM5 Connector COM6 COM6 Connector DEBUG Debug Connector DIMM_A1 DIMM1 Slot DIMM_B1 DIMM2 Slot Digital I/O Connector...

  • Page 19: Setting Jumpers

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers.

  • Page 20: Clear Cmos (Clrtc)

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.7 Clear CMOS (CLRTC) CLRTC Function RTC Batt. Clear CMOS 2.8 LVDS Panel Voltage Selection (J1) Function +3.3V (Default) 2.9 Inverter Voltage Selection (J2)

  • Page 21: Com1 Ring/+5V/+12V Selection (J5)

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.12 COM1 Ring/+5V/+12V Selection (J5) Function +12V Ring (Default) 2.13 Internal COM Serial Port Connector (COM2 ~ COM6) Signal Signal (NC)

  • Page 22: 1000Base-T Ethernet Connector With Dock Usb 2.0 Connector (Lan1_ Usb12 / Lan2_ Usb34)

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.15 1000Base-T Ethernet Connector with Dock USB 2.0 Connector (LAN1_ USB12 / LAN2_ USB34) Signal Signal USB2_DN2...

  • Page 23: Front Panel Connector (F_Panel)

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B DIO_I#3 (DIO_P#3) DIO_I#4 (DIO_P#4) DIO_O#1 (DIO_P#5) DIO_O#2 (DIO_P#6) DIO_O#3 (DIO_P#7) DIO_O#4 (DIO_P#8) 2.17 Front Panel Connector (F_PANEL) Signal Signal...
  • Page 24 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B LVDS1_D3- LVDS1_D3+ LVDS1_D2- LVDS1_D2+ LVDS1_D1- LVDS1_D1+ LVDS1_D0- LVDS1_D0+ EDID_Data EDID_Clk LVDS0_D3- LVDS0_D3+ LVDS0_D2- LVDS0_D2+...

  • Page 25: Sata Power Connector (Pwr1)

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2.20 SATA Power Connector (PWR1) Signal +12V 2.21 FAN Connector (S_FAN1 / S_FAN2) Signal SENSE 2.22 Internal USB 2.0 Connector (USB910)

  • Page 26: Chapter 3 Ami Bios Setup

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 27: System Test And Initialization

    3. The CMOS memory has lost power and the configuration information has been erased. The EMB-H61B CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it runs down.

  • Page 28: Ami Bios Setup

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
  • Page 29 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Setup Menu Setup submenu: Main Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-4...
  • Page 30 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ACPI Settings Options summary : Suspend mode S1 (CPU Stop Clock) S3 (Suspend to Optimal Default, Failsafe RAM)
  • Page 31 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Trusted Computing Options summary: Security Disabled Optimal Default, Failsafe Device Support Default Enabled En/Disable TPM support.
  • Page 32 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Enable Take Ownership Disable Take Ownership TPM Clear Select one-time TPM operation. Item value returns to ‘None’ after next POST.
  • Page 33 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B CPU Configuration Chapter 3 AMI BIOS Setup 3-8...
  • Page 34 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Options summary : Hyper-Threading Disabled Enabled Optimal Default, Failsafe Default En/Disable CPU Hyper-Threading function Intel Disabled Optimal Default, Failsafe...
  • Page 35 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Digital IO Configuration Options summary : DIO_P# 1-4 Input Optimal Default, Failsafe Default Output Set GPIO as Input or Output...
  • Page 36 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B DIO_P# 1-8 Direction High Optimal Default, Failsafe Default Set GPIO Output as Hi or Low. SATA Controller(s) Options summary : SATA Controller(s)
  • Page 37 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B AHCI IDE: Configure SATA controllers as legacy IDE AHCI: Configure SATA controllers to operate in AHCI mode SATA Controller Gen1 Default...
  • Page 38 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B USB Configuration Options summary: Legacy USB Support Enabled Optimal Default, Failsafe Default Disabled Auto...
  • Page 39 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Forced FDD Hard Disk CDROM If Auto. USB devices less than 530MB will be emulated as Floppy and remaining as Floppy and remaining as hard drive.
  • Page 40 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Serial Port Configuration Chapter 3 AMI BIOS Setup 3-15...
  • Page 41 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Options summary : F81866 ERP Function Disabled Default Enabled Enable or Disable ERP function. Serial Port Disabled Enabled...
  • Page 42 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B IO=2E8h; IRQ=10,11 Allows BIOS to Select Serial Port resource. Change Settings Auto Default (Serial Port 3)
  • Page 43 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B IO=2D8h; IRQ=10,11 Allows BIOS to Select Serial Port resource. Device Mode Disable IR1 function Default Enable IR1 function,...
  • Page 44 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Smart Fan Mode Configuration Chapter 3 AMI BIOS Setup 3-19...
  • Page 45 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Options summary : SYS/CPU Smart Auto by RPM Fan Control Auto by Duty-Cycle Default Manual by RPM Manual by...
  • Page 46 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Setup submenu: Chipset PCH-IO Configuration Chapter 3 AMI BIOS Setup 3-21...
  • Page 47 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Options summary : Power Mode ATX Type Optimal Default, Failsafe Default AT Type Select Power Mode.
  • Page 48 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B System Agent (SA) Configuration Options summary : PCIE x 4 Gen Speed Gen1 Optimal Default, Failsafe Default...
  • Page 49 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Graphics Configuration Options summary : Primary Display Auto Default IGFX Select which of IGFX/PEG Graphics device should be Primary Display.
  • Page 50 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Select the GTT Size. Aperture Size 128MB 256MB Default 512MB Select the Aperture Size. DVMT Pre-Allocated Default 128M...
  • Page 51 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B DVMT Total Gfx Mem 128M 256M Default Select DVMT Total Graphics Memory Primary IGFX Boot Display AUTO Default HDMI-1...
  • Page 52 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 1280x768 24Bit 1366x768 24Bit 1440x900 48Bit 1920x1080 48Bit 1280x1024 18Bit 1280x1024 24Bit Select LCD panel used by Internal Graphics Device by selecting the appropriate setup item.
  • Page 53 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Setup submenu: Boot Options summary : Bootup NumLock Default State Select the keyboard NumLock state. Quiet Boot Disabled Default...
  • Page 54 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B GateA20 Active Upon Request Default Always UPON REQUEST – GA20 can be disabled using BIOS services. ALWAYS –...
  • Page 55 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Setup submenu: Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password.
  • Page 56 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B box press Enter to disable password protection. Setup submenu: Exit Chapter 3 AMI BIOS Setup 3-31...

  • Page 57: Chapter 4 Driver Installation

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Chapter Driver Installation Chapter 4 Driver Installation...
  • Page 58 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Follow the sequence below to install the drivers: Step 1 – Install Chipset Driver Step 2 –...
  • Page 59 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 4.1 Installation: Insert DVD-ROM into the DVD-ROM Drive. And install the drivers from Step 1 to Step 8 in order.
  • Page 60 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B 2. Follow the instructions that the window shows 3. The system will help you to install the driver automatically Step 5 –...
  • Page 61 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Chapter4 Drivers Installation...
  • Page 62 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Chapter 4 Driver Installation...
  • Page 63 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Chapter4 Drivers Installation...

  • Page 64: Appendix A Programming The Watchdog Timer

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1...

  • Page 65: Watchdog Timer Initial Program

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B A.1 Watchdog Timer Initial Program Table 1 : SuperIO relative register table Default Value Note SIO MB PnP Mode Index Register...
  • Page 66 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ************************************************************************************ // SuperIO relative definition (Please reference to Table 1) #define byte SIOIndex //This parameter is represented from Note1 #define byte SIOData //This parameter is represented from Note2 #define void IOWriteByte(byte IOPort, byte Value);...
  • Page 67 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ************************************************************************************ Main VOID // Procedure : AaeonWDTConfig // (byte)Timer : Time of WDT timer.(0x00~0xFF) // (boolean)Unit : Select time unit(0: second, 1: minute).
  • Page 68 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ************************************************************************************ // Procedure : AaeonWDTEnable AaeonWDTEnable () VOID WDTEnableDisable( EnableLDN, EnableReg, EnableBit, 1 // Procedure : AaeonWDTConfig AaeonWDTConfig () VOID...
  • Page 69 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ************************************************************************************ SIOEnterMBPnPMode() VOID IOWriteByte(SIOIndex, 0x87); IOWriteByte(SIOIndex, 0x87); SIOExitMBPnPMode() VOID IOWriteByte(SIOIndex, 0xAA); SIOSelectLDN(byte LDN) VOID IOWriteByte(SIOIndex, 0x07);...

  • Page 70: Appendix B Mating Connector

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Appendix Mating Connector B - 1 Appendix B Mating Connector...

  • Page 71: List Of Mating Connectors And Cables

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 A .1 List of Mating Connectors and Cables Support up to 65W The table notes mating connectors and available cables.
  • Page 72 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B HDMI1 HDMI CON 19P,0.5MM,A SINBON 1165-92104-24D TYPE,R/A HDMI2 HDMI CON 19P,0.5MM,A SINBON 1165-92104-24D TYPE,R/A...

  • Page 73: Electrical Specifications

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B Appendix Electrical Specifications for I/O Ports Appendix C Electrical Specifications for I/O Ports...

  • Page 74: Dio Programming

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B C.1 DIO Programming EMB-H61B utilizes FINTEK 81866 chipset as its Digital I/O controller. Below are the procedures to complete its configuration and the AAEON initial watchdog timer program is also attached based on which you can develop customized program to fit your application.

  • Page 75: Digital I/O Register

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B C.2 Digital I/O Register Table 1 : SuperIO relative register table Default Value Note SIO MB PnP Mode Index Register...

  • Page 76: Digital I/O Sample Program

    I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B C.3 Digital I/O Sample Program ************************************************************************************ // SuperIO relative definition (Please reference to Table 1) #define byte SIOIndex //This parameter is represented from Note1 #define byte SIOData //This parameter is represented from Note2 #define void IOWriteByte(byte IOPort, byte Value);...
  • Page 77 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ************************************************************************************ // Digital Output control relative definition (Please reference to Table 3) #define byte DOutput1LDN // This parameter is represented from Note27 #define byte DOutput1Reg // This parameter is represented from Note28 #define byte DOutput1Bit // This parameter is represented from Note29...
  • Page 78 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ************************************************************************************ Main VOID Boolean PinStatus ; // Procedure : AaeonReadPinStatus // Input : Example, Read Digital I/O Pin 3 status // Output : InputStatus :...
  • Page 79 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ************************************************************************************ AaeonReadPinStatus(byte LDN, byte Register, byte BitNum) Boolean Boolean PinStatus ; PinStatus = SIOBitRead(LDN, Register, BitNum);...
  • Page 80 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ************************************************************************************ SIOEnterMBPnPMode() VOID IOWriteByte(SIOIndex, 0x87); IOWriteByte(SIOIndex, 0x87); SIOExitMBPnPMode() VOID IOWriteByte(SIOIndex, 0xAA); SIOSelectLDN(byte LDN) VOID IOWriteByte(SIOIndex, 0x07);...
  • Page 81 I n d u s t r i a l M o t h e r b o a r d E M B - H 6 1 B ************************************************************************************ SIOBitRead(byte LDN, byte Register, byte BitNum) Boolean Byte TmpValue; SIOEnterMBPnPMode(); SIOSelectLDN(LDN);...
  • Page 82 Partner in Electronic Components & Supply Chain Solutions The Netherlands Denmark Elektrostraat 17 Nørregade 15 NL-7483 PG Haaksbergen DK-9240 Nibe Tel: +31 (0)53 573 33 33 Tel: +45 88 20 26 30 Fax: +31 (0)53 573 33 30 Fax: +45 88 20 26 39 nl@texim-europe.com nordic@texim-europe.com Belgium...

Table of Contents