Reset Cmos To Last Known Values; Reset Cmos To Factory Defaults; Write To Cmos And Exit; Exit Without Changing Cmos - Aaeon Raptor MicroATX Installation Manual

Raptor MicroATX – Installation Guide
Figure 2-2: The Embedded BIOS Shadow Setup Screen is used to
configure ROM shadowing.

Reset CMOS to Last Known Values

Loads the CMOS to the last known values.

Reset CMOS to Factory Defaults

The Fail-Safe CMOS factory Setup option settings can be
loaded by selecting the Reset CMOS to Factory Defaults. Use
this option as a diagnostic aid if the system is behaving
erratically.

Write to CMOS and Exit

Exit BIOS saving the changes.

Exit without Changing CMOS

This option allows exiting the BIOS setup without saving any
change to the CMOS.
26