Aaeon ECM-5716 Series User Manual page 64

All-in-one pentium-m single board with lvds, tmds, ac97 audio, ieee-1394a, pcmcia, dual 10/100base-tx ethernet interfaces, 4usb 2.0, 2coms & intel gigabit ethernet interface (optional)
Table of Contents

Advertisement

4.5.3.10
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you hold the key down.
The choice: 6, 8, 10, 12, 15, 20, 24, or 30.
4.5.3.11
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The choice: 250, 500, 750, or 1000.
4.5.3.12
Security Option
Select whether the password is required every time the system boots or only when you
enter setup.
System The system will not boot and access to Setup will be
Setup
Note: To disable security, select PASSWORD SETTING at Main Menu and then you will
be asked to enter password. Do not type anything and just press <Enter>, it will
disable security. Once the security is disabled, the system will boot and you can
enter Setup freely.
4.5.3.13
APIC Mode
The BIOS supports versions 1.4 of the Intel multiprocessor specification. When enabled,
The MPS Version 1.4 Control for OS can be activated.
The choice: Enabled/Disabled.
4.5.3.14
OS Select for DRAM > 64MB
Select the operating system that is running with greater than 64MB of RAM on the system.
The choice: Non-OS2, OS2.
4.5.3.15
Report No FDD For WIN 95
The original Windows95 requires the presence of a floppy. Unless the BIOS tells it to
disregard the absence of the drive, it will generate an error message. For other operating
systems as Win98 etc this field is without relevance.
No
Yes
denied if the correct password is not entered at the
prompt.
The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt.
Don' t generate error message
Generate error message
ECM-5716 Series User' s Manual 51
ECM-5716 Series

Advertisement

Table of Contents
loading

Table of Contents