Table of Contents
Advertisement
User' s Manual
4.5.5
Integrated Peripherals
4.5.5.1
On-Chip Primary PCI IDE
The chipset contains a PCI IDE interface with support for two IDE channels. Select
Enabled to activate the primary IDE interface. Select Disabled to deactivate this interface.
The choice: Enabled, Disabled.
4.5.5.2
On-Chip Senondary PCI IDE
The chipset contains a PCI IDE interface with support for two IDE channels. Select
Enabled to activate the secondary IDE interface.
interface.
The choice: Enabled, Disabled.
4.5.5.3
Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each
of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4
provide successively increased performance. In Auto mode, the system automatically
determines the best mode for each device.
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4.
4.5.5.4
Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
master driver). If your hard drive and your system software both support Ultra DMA/33,
select Auto to enable BIOS support.
The Choice: Auto, Disabled.
4.5.5.5
USB Controller
This item allows you to set the USB Controller to Enabled/Disabled.
The choice: Enabled , Disabled.
4.5.5.6
USB Keyboard Support
This item allows you to set the system' s USB keyboard to Enabled/Disabled.
The choice: Enabled , Disabled.
4.5.5.7
Init Display First
This item allows you to decide to active whether PCI Slot or AGP first.
The choice: PCI Slot, AGP/Onboard
54 ECM-5716 Series User' s Manual
Select Disabled to deactivate this
Advertisement
Table of Contents
