Main Menu; Fps; Varispeed - Red Epic Epic-X Operation Manual

MAIN MENU

Available options under the MAIN MENU are FRAMERATE (FPS), ISO (SENSATIVITY), F STOP, 1/SEC
(EXPOSURE), WHITE BALANCE, RESOLUTION, and QUALITY (REDcode).

FPS

Used to select an image capture frame rate that differs from the Project's TIME BASE frame rate.
Ranges are as follows:
•
1 sec – 300 fps (2K 2.4:1)
•
1 sec – 120 fps (4K HD)
• 1 sec – 96 fps (5K ANA)
Default is 24 fps (or the selected Project TIME BASE frame rate if not 23.98 or 24.00 fps). 1 sec
translates to 1 second per frame.
Available frame rate is dependent on Resolution and REDcode settings. Refer to RECODE > REDCODE
OPTIONS FOR VARIOUS FRAME RATES table.

VARISPEED

When a frame rate other than the current TIME BASE has been selected, the FPS text will turn Yellow
and VARISPEED will be shown where the Audio Meter is normally displayed at the lower right of the
display.
Version 2.0.5R1
DECEMBER 20, 2011
•
1 sec – 120 fps (5K 2.4:1)
•
1 sec – 96 fps (5K FF)
•
1 sec – 96 fps (5K 2:1)
©2011 RED.COM INC.
53