Perform A Black Shading Calibration - Red Epic EPIC-M BUILD V3.3 Operation Manual

NOTE: When fully inserted, the SSD media protrudes slightly from the SSD slot.
When SSD media is inserted into the camera, the camera will recognize if the media is unformatted:
On LCD, EVF and external monitors, in the media section of the GUI, NONE will be displayed twice (as
-
opposed to when no media is inserted, the GUI displays NONE with three dashes below "---").
On REDMOTE, NONE will be displayed twice (as opposed to when no media is inserted, the GUI
-
displays NONE with three dashes below "---").
On the Side Handle, NA will be displayed (same as if no media is present).
-
To format the media select SECONDARY MENUS > MEDIA > FORMAT MEDIA.
When FORMAT is selected, a FORMAT dialog box will appear allowing you to add Camera Identity and
3D Position properties when formatting. When desired options are set, select FORMAT.
NOTE: If any clips will be erased on the attached media, you will be informed of the number.

PERFORM A BLACK SHADING CALIBRATION

Refer to SECONDARY MENUS > SETTINGS > MAINTENANCE > CALIBRATION for complete details for
performing a Black Shading Calibration.
64 64 64 64
COPYRIGHT © 2012 RED.com, Inc. 955-0002_v3.3, Rev- B