First Time Use - Setting Up Your Red Epic; Attach Power Source; Battery - Red Epic EPIC-M BUILD V3.3 Operation Manual

Table of Contents

Advertisement

FIRST TIME USE – SETTING UP YOUR RED EPIC

ATTACH POWER SOURCE

If a REDVOLT battery is installed in the Side Handle and DC power is connect through the DC IN
connector, the DC IN power supply has priority and will power the camera instead of the battery.

BATTERY

Connect a RED battery to the camera in one of the following ways:
SIDE HANDLE
Attach a Side Handle and insert a REDVOLT battery.
INSTALL
1. Press the battery door release button (A).
2. Open battery door (B).
3. Press upwards on retainer (C).
4. Insert a REDVOLT battery until it is fully seated and retainer (C) clicks into place.
5. Close battery door.
955-0002_v3.3, Rev-B
C
B
COPYRIGHT © 2012 RED.cm, Inc.
A
61
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Epic-mEpic-x

Table of Contents