Table of Contents
Advertisement
This will open the camera's web interface in the browser that is set as default where you
can configure the camera and view the images.
5.3.4. Accessing the IP Camera Using Internet Explorer
To access this camera through Internet Explorer, launch the browser and enter the
following in the address field: http://<IP>:<port>/, where <IP> is the IP address of the camera,
<port> is the number of the port that is used for HTTP connection to the camera (Pic. 5.23).
IMPORTANT!
On default the IP address of N300 is 192.168.0.99 and the http-port is 80.
NOTE:
You do not need to enter a port number if you are connecting through the default HTTP port 80.
5.4. Accessing the Camera's Web Interface
As you have accessed the camera using any of the ways described in paragraphs
5.3.4, Internet Explorer will be launched and an authorization window will appear.
NOTE:
Use of the camera's web interface requires Internet Explorer 9.0 or later to run and display correctly.
Enter a username and a password, then click [OK] (Pic. 5.24).
IMPORTANT!
On default a username is admin and a password is admin.
N300 Installation User Manual
Chapter 5. Setting Up the Wired Connection for Windows 7
Pic. 5.23
5.3.2 –
28
Advertisement
Table of Contents
