Specifications; Technical Support - Elan D12 Installation Manual

D12
INSTALLATION MANUAL

Specifications

Audio Section
Output Power RMS
Frequency Response
Full Power Bandwidth
Signal to Noise
Channel Separation
Total Harmonic Distortion
Intermodulation Distortion
Input Impedance
Connectors
Input/Loop Output
Speaker Output
Power
AC Power Requirements
Current Draw
Standby Power saving Mode
Triggers
Remote Trigger Input
Loop Output trigger
Dimensions w/Feet (3U w/o Feet
In.
mm.
Weight
lbs.
kg.

Technical Support

If, after carefully following the steps in the Troubleshooting section, you are unable
to resolve issues with the installation or operation of the D12 Digital Power Amplifier,
please call ELAN Technical Support at 1-800-622-ELAN (3526).
Page 50
100WPC @ 4 Ohms, 75WPC @ 8 Ohms all channels driven
20Hz to 20kHz -3 dB at 8 Ohms
10Hz to 25kHz
> 102 dB (A weighted)
> -70dB (channel to channel @ 1kHz)
< .04%
< 0.1%
49k Ohms
RCA Stereo
Gold Plated 5 Way Binding Post
120VAC, 1440W / 240VAC, 1440W
12A @ 120 VAC / 6A @ 240VAC
20W
5 to 24 Volts AC/DC
+12VDC @ 10 mA
17 W x 5 7/8 H x 17 D
432 W x 149 H x 432 D
47
21.32
E L A N H O M E S Y S T E M S
© ELAN Home Systems 2009 • All rights reserved.