Via!Net Address; Channel Range - Elan D12 Installation Manual

D12
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
Press the Menu button to cycle to the beginning of the Main menu.

VIA!NET Address

This menu sets the VIA!NET Address for the amplifier chassis as 1 of 16 possible addresses.
The default setting is 0.
The options are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F providing a total of 16 chassis.
The amplifier will need to be set to an I.D. that is not already being used by another 'D Series' amplifier.
VIA!NET Address Menu
Press UP and DOWN buttons to select the VIA!NET ADDRESS.
Press the Channel button to cycle to the next Utility menu.
Press the Menu button to cycle to the beginning of the Main menu.

Channel Range

This menu sets the IR codes to be processed based on the channel numbers selected.
The default range is 1-12.
16 chassis can be used for a total of 192 channels.
D12s can have the same channel range settings if you want the D12s to respond to the same IR Commands.
Channel Range Menu
© ELAN Home Systems 2009 • All rights reserved. Page 23