Removing The Basket, Basket Hub, & Lint Filter - Whirlpool Cabrio WTW6400S Technical Manual

REMOVING THE BASKET, BASKET HUB, & LlNT FILTER
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Raise the cabinet top (see step 3e on
page 4-4 for the procedure).
3. To remove the basket:
a) Loosen the clamp and pull the recircu-
lation hose off the tub ring.
b) Pry out and unsnap the tub ring tabs
from the tub and remove the tub ring.
Recirculation Hose
Ring Tabs
c) Insert the blade of a small screwdriver
into the slot in the impeller cap, then
pry the cap up, and remove it.
d) Remove the 7/16˝ hex-head bolt from
the impeller, then lift and remove the
impeller from the basket. NOTE: Lift-
ing the basket will assist in removing
the impeller.
Impeller
e) Lift the basket out of the washer.
4-10
Impeller Cap
7/16˝ Impeller Bolt