Removing A Dispenser, The Fresh Fill Inlet Valve, And The Lid Lock - Whirlpool Cabrio WTW6400S Technical Manual

FRESH FILL INLET VALVE, AND THE LID LOCK
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Raise the washer lid.
Dispensers
NOTE: The removal procedure for the three
dispensers is the same so only one will be
shown removed.
3. To remove a dispenser:
a) Use a small screwdriver and pry out
on the three dispenser cover tabs
while you lift the cover off the dispens-
er (see the top right photo).
REMOVING A DISPENSER, THE
Pry Out Tab
b) Squeeze the bottom of the dispenser,
and release the hooked segments at
the top of the dispenser from the cabi-
net, then push the dispenser out of its
cutout.
4-6
Dispenser Cover
Hook