Whirlpool Cabrio WTW6400S Technical Manual page 32

DELAY WASH
You can use the Delay Wash feature to delay
the start of a wash cycle for up to 10 hours
(depending on your model).
1. Load the washer and fill the dispensers.
2. Close the washer lid.
3. Press POWER.
4. Select the desired Cycle, Modifiers and
Options.
5. Press DELAY WASH. 1H (one hour) will be
displayed in the time display window. The
indicator light for Delay Wash will glow.
6. For a longer delay time, press DELAY
WASH. The Start time will increase by 1-
hour steps.
7. Press START. The countdown in hours to
the wash cycle will show in the time display
window and the indicator light will begin to
flash.
NOTE: The Start indicator light will not
flash when Delay Wash is chosen. You
must press Start to initiate a countdown
for the cycle to begin.
To change the Delay Wash time:
• Press PAUSE/CANCEL.
• Press DELAY WASH to select the desired
delay time.
• Press START to begin the countdown.
To cancel Delay Wash:
Press START again to begin the cycle right
away or press PAUSE/CANCEL twice.
OPTIONS
Use these pads to select the desired options
for your wash cycle.
DEEP CLEAN
This option provides enhanced cleaning ac-
tion for tough stains. The Heavy Duty cycle
automatically includes Deep Clean. Choosing
Deep Clean will add approximately 5 minutes
to a cycle. Deep Clean should be started on a
dry load only and should not be selected after
the tub has started filling with water.
Deep Clean may be selected as an option with
other cycles. See table for details.
Cycle
Whitest Whites
Heavy Duty
Bulky Items
Sheets/Towels
Normal
Casual/Perm Press
Colors/Darks
Quick Wash
Wool
Delicate/Handwash
Soak
Rinse & Spin
Drain & Spin
Clean Washer
3-10
Deep Clean
(Adds time to the wash cycle)
Option
Default
Not available
Not available
Option
Option
Option
Option
Not available
Option
Not available
Not available
Not available
Not available