One-Shot Recording (One-Shot Rec) - Panasonic AG-HPX500P Operating Instructions Manual

2
Select INTERVAL in the REC FUNCTION
item in the menu option RECORDING
SETUP screen.
3
Set the time in the INTERVAL TIME item
in the menu option RECORDING SETUP
screen.
4
Press the START/STOP button.
• The camera will repeat 1-frame recording for
the time interval set in the INTERVAL TIME
item.
• Press the STOP button to stop recording.
• To cancel this function, turn the camera off or
select NORMAL in the REC FUNCTION item.
•The following indications appear to the left of
the operation status display.
• During recording: "I-REC" stays lit.
• During a pause: "I-PAUSE" stays lit.
• When a setting of less than 2 seconds is
made in step 3, "I-REC" blinks according to
time setting during recording.
• When stopped:"I-" in "I-PAUSE" blinks.
<Note>
• The pre-recording function is not available.
• Sound is not recorded.
• Data recorded (until the STOP button is
pressed) in this mode is recorded as a single
file.
• The 1394 connector does not output any
signals.
• This function is not available if a DIR ENTRY NG
CARD is inserted.
• A card inserted during recording is recognized
after recording stops.
40
Special Recording Modes
One-shot recording (ONE-
SHOT REC)
This function records a single shot at each unit of time
which has been set.
1
Check that the OPERATION TYPE item
in the menu option RECORDING SETUP
screen and the recording format are set
as described below.
•OPERATION TYPE item:
VIDEO CAM
• Recording format:
They are available at 1080i/60i (50i),
720P/60P (50P), or in SD at 60i (50i),
30P/25P.
2
Select ONE SHOT in the REC
FUNCTION item in the menu option
RECORDING SETUP screen.
3
Set the time in the ONE SHOT TIME
item in the menu option RECORDING
SETUP screen.
4
Press the START/STOP button.
• The camera will pause recording after making
a recording that lasts the duration set in step
3.
• Press the STOP button to stop recording.
• To cancel this function, turn the camera off or
select NORMAL in the REC FUNCTION item.
•The following indications appear to the left of
the operation status display.
• During recording: "I-REC" stays lit.
• During a pause: "I-PAUSE" stays lit.
• When stopped:"I-" in "I-PAUSE" blinks.
<Note>
• No other functions are available during
operation.
• The pre-recording function is not available.
• Sound is not recorded.
• Data recorded (until the STOP button is
pressed) in this mode is recorded as a single
file.
• Video output via the 1394 connector is not
guaranteed.
• This function is not available if a DIR ENTRY NG
CARD is inserted.
• During continuous one-shot recording,
recording operation speed may be decreased.
• A card inserted during recording is recognized
after recording stops.