Panasonic AG-HPX500P Operating Instructions Manual page 105

Contents of P2 Card Status Display
Settings
Select PROPERTY → PROPERTY SETUP →
P2CARD CAP. The following screen appears.
■When "REMAIN" is selected:
1
Write-protect Mark
1
The mark appears if the P2 card is write-
protected.
P2 Card Status (remaining free space)
2
The remaining memory capacity of the P2 card is
indicated by a bar graph and percentage. The bar
graph indicator moves to the left as the remaining
free space decreases.
The following indications may appear, depending
on the card status:
• FORMAT ERROR:
An unformatted P2 card is inserted.
• NOT SUPPORTED:
An unsupported card is inserted in the camera.
• NO CARD:
P2 cards are not inserted.
Press the SET button to view the following data
for the card in the selected slot (indicated in
yellow numbers).
• BRAND: maker name
• MODEL NO.: model number
• SERIAL NO.: serial number
• USER ID: user ID
• WARNING: DIR ENTRY NG (DIR location error)
RUN DOWN CARD (life)
P2 Card Remaining Capacity/Total
3
Capacity
Displays the P2 card remaining capacity and total
capacity in minutes.
The total of the remaining memory capacity for
each P2 card that is displayed may not match
the actual total remaining memory capacity for
the P2 cards because only the figure in minute is
displayed.
Total remaining free space for the slot
4
Displays the total remaining free space for all 4
slots.
Please note that the remaining capacity of a
write-protected P2 card is not included in the total
remaining capacity.
2
3
4
■When "USED" is selected:
1
Write-protect Mark
1
The mark appears if the P2 card is write-
protected.
P2 Card Status (used memory capacity)
2
The used memory capacity of the P2 card is
indicated by a bar graph and a percentage figure.
The bar graph indicator moves to the right as the
used memory capacity increases.
The following indications may appear, depending
on the card status:
• FORMAT ERROR:
An unformatted P2 card is inserted.
• NOT SUPPORTED:
An unsupported card is inserted in the camera.
• NO CARD:
P2 cards are not inserted.
Press the SET button to view the following data
for the card in the selected slot (indicated in
yellow numbers).
• BRAND: maker name
• MODEL NO.: model number
• SERIAL NO.: serial number
• USER ID: user ID
• WARNING: DIR ENTRY NG (DIR location error)
RUN DOWN CARD (life)
P2 Card memory capacity/Total Capacity
3
Displays the used memory capacity on a P2 card
and the total capacity, in minutes.
Because fractions are truncated, the figure shown
for used memory capacity on a P2 card may differ
from the figure for total capacity.
The used memory capacity of a write-protected
P2 card is displayed as 100%.
Total used memory capacity for all slots
4
Displays the total used memory capacity for all 4
slots.
2
3
4
Properties
105