Table of Contents
Advertisement
•
Operation is not possible even if only one of
the inserted cards is DIR ENTRY NG CARD.
(Page 91)
•
After interval recording has started, a
recordable P2 card cannot be used even if it
is inserted into an empty slot.
•
The slots for recording in this mode are
indicated by the orange P2 card access
lamps.
The slots for recording P2 cards that are
inserted after starting recording are indicated
by the green P2 card access lamps.
•
Text memos cannot be added.
One-shot recording (ONE-SHOT REC)
This function records a single shot at each unit of
1
Check that the settings given on page 46
have been established for the OPERATION
TYPE item and recording format.
2
Select ONE SHOT under REC FUNCTION.
(Page 104)
•
For menu operations (Page 94)
3
Set the recording time using ONE-SHOT
TIME. (Page 104)
4
Recording continues for the duration set in
step 2 and then goes on standby.
To stop operation, push the Operation lever in
the g direction.
FUNCTION.
•
of the operation status display.
In temporary standby: I-PAUSE lights up.
While recording is stopped: The "I-" of
•
•
No sound is recorded.
•
•
images.
•
Operation is not possible even if only one of
the inserted cards is DIR ENTRY NG CARD.
(Page 91)
•
When continuous one-shot recording
is performed, there may be delays in
•
After one-shot recording has started, a
recordable P2 card cannot be used even if it
is inserted into an empty slot.
•
The slots for recording in this mode are
indicated by the orange P2 card access
lamps.
•
The slots for recording P2 cards that are
inserted after starting recording are indicated
by the green P2 card access lamps.
•
Text memos cannot be added.
Loop recording (LOOP REC)
P2 cards into the card slots. If there is not enough
free memory remaining on the second card,
recorded in their place. (Clip deletion is performed
1
Check that the settings given on page 46
have been established for the OPERATION
TYPE item and recording format.
2
Select LOOP under REC FUNCTION.
(Page 104)
•
For menu operations (Page 94)
3
Recording starts.
To stop operation, press the START/STOP
button.
To release the function, either turn off the
FUNCTION.
•
of the operation status display.
up.
While recording is stopped: L-PAUSE lights
up.
•
capacity of more than one minute. Recording
(Continued on the next page)
47
Advertisement
Table of Contents
