Menu Operation Section - Panasonic AG-HPX500P Operating Instructions Manual

Menu Operation Section

6
5
MENU button
1
Press this button to display the setting menu and
press it again to return to the previous image.
This button is not available in the thumbnail
display.
<NOTE>
Use the SET button or the JOG dial button to go
between menus and select items. For details, see
section [Viewfinder and LCD menus].
Thumbnail button
2
In MCR mode, press this button to open the
thumbnail screen.
Note that this switchover is not performed during
recording or playback.
Thumbnail menu button
3
In thumbnail display mode, use this button to
access thumbnail menu functions to delete clips,
for example.
Pressing this button when thumbnail is not shown
in camera mode or MCR mode displays the
camera menu or MCR menu.
<Note>
Use the CURSOR and SET buttons to select
thumbnails and access menu functions. For details,
see [Manipulating Clips with Thumbnails].
CURSOR and SET buttons
4
Use these buttons to manipulate menus, the
menu bar and thumbnails.
The four triangular buttons are CURSOR buttons
and the square center button is the SET button.
PAGE/VAR button
5
Pressing this button during thumbnail display
scrolls thumbnail pages forwards and backwards
in page units.
24
1
2
3 4
JOG dial button
6
Use this button to go between menu pages and
to select and set items in open setting menus
(camera menu or MCR menu).
In a setting menu, turning the JOG dial
downwards moves the menu cursor downwards
and turning it upwards moves the menu cursor
upwards.
Press the JOG dial button to confirm made
settings.