Checking And Displaying Shooting Status; Setting The Marker Displays - Panasonic AG-HPX500P Operating Instructions Manual

Checking and displaying
shooting status
• Hold down the DISP/MODE CHECK button in
recording standby or during recording to display
the settings of each shooting function, the list of
functions assigned to USER buttons and all other
information. Press again to return to the regular
screen.
• Press the DISP/MODE CHECK button during
recording standby or recording clears all displays.
Press again to return to the regular display.
• These settings are maintained when the unit is
turned off and also when switching media and
operating mode.
• Display the following items on the viewfinder and
LCD monitor screen by pressing the DISP/MODE
CHECK button or by configuring OTHER DISPLAY of
the DISPLAY SETUP screen of the setup menus.
Displays
1 Time code display
AUTO/MANUAL switch
3
operation display
Recording format/
4
recording time display
5 Information display
Squeeze information
6
display
9 Calendar display
Recording/playback
10
frame rate display
11 Shutter speed display
12 Audio level meter display
13 IRIS display
14 Zoom position display
15 Auto-IRIS control display
Media remaining
16
memory display
Recommended ND filter
18
display
19 ND filter display
20 Gain display
21 AWB information display
Scene file name/DUB
23
display
24 Media data display
25 Operating status display
Remaining media
26
display
Special recording
27
display
28 Safety zone display
29 AWB, ABB error display
Chromatic aberration
30
compensation display
❍: Displayed
×: Not displayed
—: Displayed depending on other settings
The item in ❍ in the MODE CHECK space appears when you
press and hold the DISP/MODE CHECK button.
The item in ❍ in the DISPLAY space disappears when you
press the DISP/MODE CHECK button.
* Not displayed when FRAME RATE is set to 60i or 50i.
1
* 0 dB is not displayed.
2
* Only preset 3.2K and 5.6K are displayed.
3
72
Viewfinder Screen Status Displays
Audio dubbing
MODE
DISPLAY
mode
CHECK
ALL PARTIAL OFF
— — — —
❍
— ×
❍ ❍ ❍
× ×
❍ ❍ ❍
— × × ×
❍
×
❍ ❍ ❍ ❍
— — —
❍ ❍
× ×
❍ ❍ ❍*
1
×
❍ ❍ ❍ ❍
— — —
❍ ❍
×
❍ ❍ ❍ ❍
— — —
❍ ❍
×
❍ ❍ ❍ ❍
— — —
❍ ❍
×
❍ ❍ ❍ ❍
× ×
❍ ❍ ❍
×
❍ ❍ ❍ ❍*
2
×
❍ ❍ ❍ ❍*
3
× ×
❍ ❍ ❍
— — —
❍ ❍
— — —
❍ ❍
— — —
❍ ❍
— — —
❍ ❍
— — — — —
× — — —
❍
× — — —
❍

Setting the Marker Displays

Turn marker display on or off.
Select the display mode from the setting menu
DISPLAY SETUP screen.
For directions on navigating the menu, see [Setting
Menu Options].
DISPLAY SETUP
ZEBRA DETECT
MARKER
SAFETY ZONE
DATE/TIME
LEVEL MATER
ZOOM
CARD/BATT
P2CARD REMAIN
PUSH MENU TO RETURN
You can also press the USER button to which the
MARKER function has been assigned to turn the
marker on and off.
80%
ON
90%
OFF
ON
ON
ON
TOTAL