Warning And Status Display Functions; Lcd Monitor - Panasonic AG-HPX500P Operating Instructions Manual

Warning and Status Display
Functions
5
Back tally lamp
1
When the BACK TALLY switch is set to [ON], the
lamp behaves in the same way as the front tally
lamp at the viewfinder.
BACK TALLY switch
2
This switch controls the action of the back and
rear tally lamps.
ON: Back and rear tally lamps enabled.
OFF: Back and rear tally lamps disabled.
WARNING lamp
3
This lamp starts blinking or lights up if something
unusual occurs in the memory.
Rear tally lamp
4
When the BACK TALLY switch is set on [ON], the
rear tally lamp behaves in the same way as the
back tally lamp.
Mode LED
5
Shows the camera unit mode.
CAM: Lights in CAMERA mode.
MCR: Lights in MCR mode.
PC: Lights in PC mode.
26
1 2 3
4

LCD Monitor

1
LCD monitor
1
The LCD monitor displays the video in the
viewfinder.
Alternatively, it can show clips on the P2 card in a
thumbnail format.
In thumbnail display mode, you can use the
thumbnail menu buttons, CURSOR and SET
buttons to manipulate or delete clips, or format P2
cards.
OPEN button
2
Used to open the LCD monitor.
2