Table of Contents
Advertisement
Chapter 2 Parts and their Functions
2-7 Warning and Status Display
Functions
Back tally lamp
When the
BACK TALLY switch is set to [ON], the
lamp behaves in the same way as the front tally lamp at
the viewfinder.
BACK TALLY switch
This switch controls the action of the
rear tally lamps.
ON:
Back and rear tally lamps enabled.
OFF: Back and rear tally lamps disabled.
WARNING lamp
This lamp starts blinking or lights up if something
unusual occurs in the memory.
LIGHT button
Use this button to control illumination of the display
window.
Alternately pressing this button toggles illumination of
the
display window on or off.
Display window
This window displays warnings, battery-remaining level,
sound volume, time data, and other information.
Rear tally lamp
When the
BACK TALLY switch is set on [ON], the
rear tally lamp behaves in the same way as the back
tally lamp.
(continued)
2-8 Display Window Functions
P2 card/battery-remaining level indications
Media-remaining space indication bar
The bar indicates the remaining free space on each P2 card,
using a seven-segment display.
Each segment can represent either three or five minutes of
remaining free space, depending on the value set through the
menu option CARD REMAIN/ . According to the set value, the
segments disappear one-by-one. The menu option CARD
REMAIN / can be found in the <BATTERY/P2CARD> screen on
the MAIN OPERATION page.
CTL
h
MEDIA
BATT
LOOP
Battery-remaining level indication bar
For a battery with a digital indicator (percentage
indication), if the remaining level of the battery is higher
than 70%, all seven segments up to the "F" position are lit.
When the remaining level falls below 70%, the segments
go out one-by-one for each drop of 10%. All seven
segments can be set to light up when the battery-
remaining balance is 100%. To do so select "100%" for
the menu option BATT REMAIN FULL in the <BATTERY/
P2CARD> screen of the MAIN OPERATION page.
back and
Audio channel level meter
When the MONITOR SELECT CH1/2 / CH3/4 switch is set to
[CH1/2], the meter indicates 1 and 2 as the audio channel
numbers, together with their audio levels. When the switch is
set to [CH3/4], the meter indicates 3 and 4 as the audio
channel numbers, together with their audio levels.
Memory action status indication
Error Code Indication (for more information, see
[7-3 Warning System])
CTL
h
MEDIA
BATT
LOOP
Information indication
LOOP:
DRIVE:
OP-SLOT: Remains illuminated when a video encoder card is
SLAVE HOLD W
DV
OVER
VTCG TIME DATE P- REC
Y
minM
s
D
frm
E
F
E
F
13
DRIVE
OP-SLOT
SLAVE HOLD W
DV
VTCG TIME DATE P- REC
Y
minM
s
D
frm
E
F
E
F
DRIVE
OP-SLOT
Stays
illuminated
in
LOOP
information about the LOOP REC mode, see [3-5
Loop Recording].
Stays illuminated when the menu option USB is set
to "ON". The menu option USB can be found in the
<SYSTEM
MODE>
screen
SETTING page.
operated in the optional slot.
2
OVER
0
10
18
30
40
OO
24
-dB
OVER
OVER
0
10
18
30
40
OO
13
24
-dB
REC
mode.
For
on
the
SYSTEM
19
Advertisement
Table of Contents
