Warning And Status Display Functions; Lcd Monitor - Panasonic AG-HPX301E Operating Instructions Manual

Warning and Status Display
Functions
1 Back tally lamp
When the BACK TALLY switch is set to ON, this lamp
behaves in the same way as the front tally lamp.
2 Rear tally lamp
When the BACK TALLY switch is set to ON, the rear tally
lamp behaves in the same way as the back tally lamp.
3 BACK TALLY switch
Use this switch to control the back and rear tally lamps.
Enables the back and rear tally lamps.
ON:
OFF: Disables the back and rear tally lamps.
4 WARNING lamp
This lamp starts blinking or lights when an error is
detected in the memory card recorder unit.

1 3 4
2
1 LCD Monitor
2 OPEN button

LCD Monitor

1 2
The LCD monitor displays the video in the viewfinder.
Alternatively, it can show clips on the P2 card in a
thumbnail format.
For details on the LCD monitor, refer to [Viewfinder and
LCD Menus] (page 125).
In thumbnail display mode, you can use the thumbnail
menu buttons, CURSOR and SET buttons to manipulate
or delete clips, or format P2 cards.
For details, refer to [Manipulating Clips with
Thumbnails] (page 106).
Use to open the LCD monitor.