Motorola Symbol MT2070 User Manual page 129

Known APs
The Known APs screen displays the APs in range using the same ESSID as the device. This screen is only
available in Infrastructure mode. To open the Known APs screen, select Known APs in the Wireless Diagnostics
screen.
Known APs Screen
Figure 2-104
Table 2-27 includes the definitions of the icons next to the AP.
Current Profile Screen
Table 2-27
Icon
The AP is the associated access point and is set to mandatory.
The AP is the associated access point, but is not set to mandatory.
The device is not associated to this AP, but the AP is set as mandatory.
The device is not associated to this AP and the AP is not set as mandatory.
Select an AP to display a pop-up menu with the following options: Set Mandatory and Set Roaming.
Select Set Mandatory to prohibit the device from associating with a different AP. The letter M displays on top of the
icon. The device connects to the selected AP and never roams until:
•
Set Roaming is selected.
•
Set Mandatory is selected on a different AP.
•
Manually connecting to a profile from the Manage Profiles page.
•
The device roams to a new profile.
•
The device resets (warm or cold).
Select Set Roaming to allow the device to roam to any AP with a better signal. These settings are temporary and
never saved to the registry.
Select Refresh to update the list of the APs with the same ESSID.
Operating the MT2070/MT2090 2 - 81
Description