Ip Address Entry - Motorola Symbol MT2070 User Manual

2 - 56 Symbol MT2070/MT2090 User Guide

IP Address Entry

Use the IPv4 Address Type dialog to configure network address parameters: IP address, subnet mask, gateway,
DNS and WINS.
IPv4 Address Type Dialog Box
Figure 2-65
IP Address Entry
Table 2-13
Encryption
DHCP Select Dynamic Host Configuration Protocol (DHCP) from the IP Address Entry drop-down list to obtain a
leased IP address and network configuration information from a remote server. DHCP is the default setting
for the device profile. Ad-hoc mode does not support DHCP. Use only Static IP address assignment.
Static Select Static to manually assign the IP, subnet mask, default gateway, DNS and WINS addresses the device
profile uses.
Select either DHCP or Static from the drop-down list and tab to Next > and press ENT. Selecting Static IP displays
the IP Address Entry dialog. Selecting DHCP displays the Transmit Power dialog.
Use the IP Address Entry dialog to enter the IP address and subnet information.
Static IP Address Entry Dialog Box
Figure 2-66
Description