3 - 6
Symbol MT2070/MT2090 User Guide
Scanning in Presentation Mode
The optional IntelliStand adds greater flexibility to scanning operation. When you insert the device into the stand's
"cup," the device's built-in sensor places the device in presentation (hands-free) mode. When you remove the
device from the stand it operates in its normal hand-held mode.
"Cup"
Inserting the Device in the IntelliStand
Figure 3-6
To operate the device in the IntelliStand:
Connect the device to the host (see the appropriate host chapter for information on host connections).
1.
Insert the device in the IntelliStand by placing the front of the device into the stand's "cup" (see
2.
Use the IntelliStand's adjustment knobs to adjust the height and angle of the device.
3.
Center the symbol in the aiming pattern. The entire symbol must be within the brackets.
4.
Upon successful decode, the device beeps and the LED turns green. For more information on beeper and LED
5.
definitions, see
Table 3-1
and
Table
3-2.
Adjust "Cup"
Angle
Adjust Height of
IntelliStand
Figure
3-6).