User Status And Attendance Messages - Lexmark X734de Service Manual

User status and attendance messages

Error code
Close Front Door
Close top access cover
and front door
Show me
Disk Corrupted,
Reformat?
Held Jobs May Not Be
Restored
Insert Tray <x>
Load <source>
<custom type name>
Load <source>
<Custom String>
Load <source> <size>
Load Manual <custom
type name>
Load Manual
<custom string>
Action
If you continuously get this error, then either 24 V interlock switch or 5 V interlock switch is
bad. Go to "5 V interlock switch service check" on page 2-131
switch removal" on page
Close the covers top access cover and front door securely.
If you do not get a Close Top Access Cover when it is open, then go to
service check" on page 2-125.
The printer has attempted a disk recovery and cannot repair the disk. The disk must be
formatted to use.
Warning: All files stored on the disk will be lost.
The printer has attempted to restore Held jobs, but not all were restored.
Insert tray to clear the message.
Load paper in the indicated source and of the indicated type. Additional messages may
include:
• Paper loaded—Touch Continue.
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load paper in the indicated source, touch Continue.
Additional messages may include:
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load paper in the indicated source and of the indicated size, touch Continue.
Additional messages may include:
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
touching Select indicates to the printer it should search for a source with the proper custom
type.
Additional messages may include:
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
touching Select indicates to the printer it should search for a source with the proper custom
string.
Additional messages may include:
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
2-133.
7526
and "24 V interlock
"920.26—POST
2-7
Diagnostic information