Louver Control; Adjusting The Direction Of Air Circulation; Large Ceiling Type; Universal Floor/Ceiling Type - Fujitsu Airstage V-II Service Manual

3-3 LOUVER CONTROL

(1) ADJUSTING THE DIRECTION OF AIR CIRCULATION

Instructions relating to heating ( ) are applicable only to heat pump type
outdoor unit.
Begin air conditioner operation before performing this procedure.
Vertical Air Direction Adjustment
This instructions are applicable to "LARGE CEILING TYPE",
"UNIVERSAL FLOOR/CEILING TYPE", "CASSETTE TYPE",
"WALL MOUNTED TYPE" and "COMPACT WALL MOUNTED TYPE".
Press the VERTICAL AIR FLOW DIRECTION SET button.
Press the VERTICAL AIRFLOW DIRECTION button.
The temperature display will change to the vertical airflow direction setting display.
Press the VERTICAL AIRFLOW DIRECTION button to change the vertical louvre position.
The position number will appear on the display.
Cooling & Dry : 1 , 2 , 3 , 4
Heating : 1 , 2 , 3 , 4

LARGE CEILING TYPE

UNIVERSAL FLOOR/CEILING TYPE

CASSETTE TYPE
WALL MOUNTED TYPE
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
Example : When set to vertical air direction.
COMPACT WALL MOUNTED TYPE
1
2
3
DANGER!
Never place fingers or foreign objects inside the
outlet ports, since the internal fan opertes at
high speed and could cause personal injury.
Always use the remote control umit's
AIR FLOW DIRECTION button to adjust
the UP/DOWN air direction flaps or
RIGHT/LEFT air direction louvers. At-
tempting to move them manually
could result in improper operation; in
this case, stop operation and restart.
The louvers should begin to operate
properly again.
When used in a room with infants, chil-
dren, elderly or sick persons, the air
direction and room temperature
should be considered carefully when
making settings.
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown,
in accordance with the type of operation selected.
During Cooling mode : Horizontal flow
During Heating mode : Downward flow
During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal 1 ,
the air direction cannot be adjusted during this period.
03-06
4
1
4